Cassandra從很早的版本就自帶了cassandra-stress壓力測試工具，它的使用方法在cassandra-stress后添加命令和選項。其中常用的命令一般只用到：write、read、mixed、user。其中單純的write和read只測試讀和寫，mixed則測試同時讀寫。user是2.1之后新增的，通過自定義配置文件，在配置文件中可以指定insert和query查詢語句。
命令command沒有以-開頭，而選項[options]有兩種方式：-選項名稱 選項值或者選項名稱=選項值。
counter_read： 多個并發讀，必須首先通過counter_write測試填充群集。
counter_write：多個并發寫。
legacy：傳統模式的支持。
mixed：混合模式和可配置的讀寫比例和分布。集群必須先寫測試數據填充。
read: 多個并發讀取。必須首先通過寫入測試填充群集。
write: 針對群集的多個并發寫入。
user: 交錯用戶提供具有可配置比率和分布的查詢。
version: 打印cassandra-stress版本。
print: 打印定義輸出 列詳細信息，例如大小和計數分布，數據生成器
用法：
-col names =？[slice] [super =？] [comparator =？] [timestamp =？] [size = DIST（？）]
要么
-col [n = DIST（？）] [slice] [super =？] [comparator =？] [timestamp =？] [size = DIST（？）]速率
使用以下選項設置費率：
-rate threads=N [throttle=N] [fixed=N]
配置項：
threads=N 并發運行的客戶端數量。
throttle=N 所有客戶端的每秒操作達到最大速率，默認值為0。
fixed=N 期望所有客戶每秒的固定運行率。默認值為0。
或者
-rate [threads>=N] [threads<=N] [auto]
參數：
threads > = N ：同時運行至少這么多客戶端。默認值為4。
threads <= N ：最多同時運行這么多客戶端。默認值為1000。
auto 一旦吞吐量飽和，就停止增加線程。如何處理壓力測試期間遇到的錯誤
用法：
-errors [retries = N] [ignore] [skip-read-validation]
retries=N 失敗前嘗試次數。
ignore 忽略錯誤。
skip-read-validation 跳過讀取驗證和消息輸出。壓力測試生成結果圖表，可以將多個測試一起繪制成圖表。
用法:
-graph file=? [revision=?] [title=?] [op=?]日志設置
用法：
level=verbose
or
-log [level=?] [no-summary] [file=?] [hdrfile=?] [interval=?] [no-settings] [no-progress] [show-queries] [query-log-file=?]Thrift or CQL 選項
用法：
-mode thrift [smart] [user=?] [password=?]
or
-mode native [unprepared] cql3 [compression=?] [port=?] [user=?] [password=?] [auth-provider=?] [maxPending=?] [connectionsPerHost=?] [protocolVersion=?]
or
-mode simplenative [prepared] cql3 [port=?]要連接的節點
用法：
-node [datacenter=?] [whitelist] [file=?] []指定用于連接Cassandra節點的端口。9042端口用于native協議的客戶端連接。
-port [native=?] [thrift=?] [jmx=?]表結構設置
用法：
-schema [replication(?)] [keyspace=?] [compaction(?)] [compression=?]指定要將壓力命令發送到的服務器。
用法：
-sendto <host>-tokenrange
令牌范圍設置。
用法：
-tokenrange [no-wrap] [split-factor =？] [savedata =？]profile=?：指定YAML配置文件，需要自己編寫DML，插入，查詢；(只能作為user選項的子選項)
ops(?)： 指定操作類型和數量，比如ops(inserts=1)，或者ops(queries=2)，其中queries需要用指定的查詢名稱代替；(只能作為user選項的子選項)
n=?： 指定操作數量，比如要寫入1萬條數據，n=10000； 要讀取1000條數據，n=1000；
err<?： 指定均值的標準誤差; 達到此值時， cassandra-stress將結束。默認值為0.02；
truncate=?: 是否需要清空表，可選項有：never(默認值),one,always；
cl=?： 一致性級別，可選項有：ONE,QUORUM,LOCAL_QUORUM,EACH_QUORUM,ALL,ANY,LOCAL_ONE(默認值)；(只能作為user選項的子選項)
no-warmup：不要預熱過程，冷啟動任務。--注意
選項名稱，選項值必須放在 子選項選項值前面，比如正確的用法：truncate=one -node xxx
＃插入（寫入）一百萬行
cassandra-stress write n = 1000000 -rate threads = 50 -node 172.20.101.166 -port native=9042
＃讀二十萬行。
cassandra-stress讀n = 200000 -rate threads = 50 -node 172.20.101.157 -port native=9042
＃讀取行持續3分鐘。
cassandra-stress read duration = 3m -rate threads = 50 -node 172.20.101.164 -port native=9042
?；旌献x寫持續5分鐘。
cassandra-stress mixed duration = 5m -rate threads = 50 -node 172.20.101.164 -port native=9042
＃首先讀取200,000行而不預熱50,000行。
cassandra-stress read n = 200000 no-warmup -rate threads = 50 -node 172.20.101.160, 172.20.101.166 -port native=9042
#通過身份驗證運行cassandra-stress
以下示例顯示使用-mode選項提供用戶名和密碼：
cassandra-stress -mode native cql3 user = cassandra password = cassandra no-warmup cl = QUORUM
100萬條數據寫入，一致性級別為Local_Quorum，客戶端線程數=500個，2個列，副本數據=3個
cassandra-stress write n=1000000 cl=LOCAL_QUORUM -rate threads=500 \
-col "size=fixed(2048)" "n=fixed(32)" -schema "replication(factor=3)" -node 172.20.101.157 -port native=9042#
# This is an example YAML profile for cassandra-stress
#
# insert data
# cassandra-stress user profile=/home/jake/stress1.yaml ops(insert=1)
#
# read, using query simple1:
# cassandra-stress profile=/home/jake/stress1.yaml ops(simple1=1)
#
# mixed workload (90/10)
# cassandra-stress user profile=/home/jake/stress1.yaml ops(insert=1,simple1=9)
#
# Keyspace info
#
keyspace: load_test
#
# The CQL for creating a keyspace (optional if it already exists)
#
keyspace_definition: |
CREATE KEYSPACE load_test WITH replication = {'class': 'SimpleStrategy', 'replication_factor': 1};
#
# Table info
#
table: event2
#
# The CQL for creating a table you wish to stress (optional if it already exists)
#
table_definition: |
CREATE TABLE event2 (
cookie_id int,
timestamp timestamp,
event_name text,
session_id uuid,
page text,
device text,
PRIMARY KEY(cookie_id, timestamp, event_name, session_id)
) WITH CLUSTERING ORDER BY (timestamp DESC)
#
# Optional meta information on the generated columns in the above table
# The min and max only apply to text and blob types
# The distribution field represents the total unique population
# distribution of that column across rows. Supported types are
#
# EXP(min..max) An exponential distribution over the range [min..max]
# EXTREME(min..max,shape) An extreme value (Weibull) distribution over the range [min..max]
# GAUSSIAN(min..max,stdvrng) A gaussian/normal distribution, where mean=(min+max)/2, and stdev is (mean-min)/stdvrng
# GAUSSIAN(min..max,mean,stdev) A gaussian/normal distribution, with explicitly defined mean and stdev
# UNIFORM(min..max) A uniform distribution over the range [min, max]
# FIXED(val) A fixed distribution, always returning the same value
# Aliases: extr, gauss, normal, norm, weibull
#
# If preceded by ~, the distribution is inverted
#
# Defaults for all columns are size: uniform(4..8), population: uniform(1..100B), cluster: fixed(1)
#
columnspec:
- name: cookie_id
population: uniform(1..100M) # the range of unique values to select for the field (default is 100Billion)
- name: timestamp
size: fixed(13)
population: uniform(1..100M)
- name: event_name
size: uniform(5..10)
population: uniform(1..100M)
- name: session_id
size: fixed(32)
population: uniform(1..100M)
- name: page
size: gaussian(16..64)
population: uniform(1..100M)
- name: device
size: fixed(4)
population: uniform(1..10)
insert:
partitions: uniform(1..50) # number of unique partitions to update in a single operation
# if batchcount > 1, multiple batches will be used but all partitions will
# occur in all batches (unless they finish early); only the row counts will vary
batchtype: UNLOGGED # type of batch to use
select: fixed(10)/10 # uniform chance any single generated CQL row will be visited in a partition;
# generated for each partition independently, each time we visit it
#
# A list of queries you wish to run against the schema
#
queries:
simple1:
cql: select * from event2 where cookie_id = ?
fields: samerow # samerow or multirow (select arguments from the same row, or randomly from all rows in the partition)
Collapse
不要預熱過程,冷啟動任務,插入1000000萬條數據,讀寫比例3比1 ，一致性級別設置為：QUORUM
cassandra-stress user profile=./pttest-cassandra.yaml n=1000000 ops(insert=3,simple1=1) no-warmup cl=QUORUM -node 172.20.101.157 -port native=9042
結果
Results:
Op rate : 1,562 op/s [insert: 1,164 op/s, simple1: 398 op/s]
Partition rate : 30,063 pk/s [insert: 29,667 pk/s, simple1: 396 pk/s]
Row rate : 30,063 row/s [insert: 29,667 row/s, simple1: 396 row/s]
Latency mean : 28.2 ms [insert: 37.0 ms, simple1: 2.7 ms]
Latency median : 4.3 ms [insert: 6.5 ms, simple1: 1.1 ms]
Latency 95th percentile : 126.2 ms [insert: 142.5 ms, simple1: 7.7 ms]
Latency 99th percentile : 230.4 ms [insert: 254.1 ms, simple1: 23.8 ms]
Latency 99.9th percentile : 476.8 ms [insert: 554.2 ms, simple1: 96.6 ms]
Latency max : 2581.6 ms [insert: 2,581.6 ms, simple1: 2,264.9 ms]
Total partitions : 999,932 [insert: 986,756, simple1: 13,176]
Total errors : 0 [insert: 0, simple1: 0]
Total GC count : 43
Total GC memory : 12.565 GiB
Total GC time : 3.0 seconds
Avg GC time : 69.4 ms
StdDev GC time : 13.4 ms
Total operation time : 00:00:33
Improvement over 181 threadCount: -7%不要預熱過程,冷啟動任務,500并發，插入1000000萬條數據,讀寫比例3比1 ，一致性級別設置為：QUORUM
cassandra-stress user profile=./pttest-cassandra.yaml n=1000000 ops(insert=3,simple1=1) no-warmup cl=QUORUM -rate threads=500 -node 172.20.101.157 -port native=9042
Results:
Op rate : 1,496 op/s [insert: 1,145 op/s, simple1: 396 op/s]
Partition rate : 28,763 pk/s [insert: 29,221 pk/s, simple1: 394 pk/s]
Row rate : 28,763 row/s [insert: 29,221 row/s, simple1: 394 row/s]
Latency mean : 49.5 ms [insert: 64.0 ms, simple1: 7.5 ms]
Latency median : 4.9 ms [insert: 7.0 ms, simple1: 1.3 ms]
Latency 95th percentile : 251.3 ms [insert: 286.0 ms, simple1: 29.7 ms]
Latency 99th percentile : 513.0 ms [insert: 561.0 ms, simple1: 118.3 ms]
Latency 99.9th percentile : 909.1 ms [insert: 940.0 ms, simple1: 477.1 ms]
Latency max : 1416.6 ms [insert: 1,416.6 ms, simple1: 820.0 ms]
Total partitions : 999,847 [insert: 986,542, simple1: 13,305]
Total errors : 0 [insert: 0, simple1: 0]
Total GC count : 41
Total GC memory : 12.277 GiB
Total GC time : 3.0 seconds
Avg GC time : 72.3 ms
StdDev GC time : 25.0 ms
Total operation time : 00:00:34發現并發并沒有提升效率！
連接多節點，
不要預熱過程,冷啟動任務,插入1000000萬條數據,讀寫比例3比1 ，一致性級別設置為：QUORUM
cassandra-stress user profile=./pttest-cassandra.yaml n=1000000 ops(insert=3,simple1=1) no-warmup cl=QUORUM -node 172.20.101.157,172.20.101.160,172.20.101.167 -port native=9042
結果：
Results:
Op rate : 1,570 op/s [insert: 1,181 op/s, simple1: 389 op/s]
Partition rate : 30,638 pk/s [insert: 30,250 pk/s, simple1: 389 pk/s]
Row rate : 30,638 row/s [insert: 30,250 row/s, simple1: 389 row/s]
Latency mean : 32.6 ms [insert: 42.4 ms, simple1: 2.6 ms]
Latency median : 4.4 ms [insert: 6.6 ms, simple1: 1.3 ms]
Latency 95th percentile : 128.6 ms [insert: 146.9 ms, simple1: 7.7 ms]
Latency 99th percentile : 283.4 ms [insert: 336.3 ms, simple1: 21.6 ms]
Latency 99.9th percentile : 2334.1 ms [insert: 2,344.6 ms, simple1: 78.0 ms]
Latency max : 2730.5 ms [insert: 2,730.5 ms, simple1: 414.7 ms]
Total partitions : 999,987 [insert: 987,306, simple1: 12,681]
Total errors : 0 [insert: 0, simple1: 0]
Total GC count : 43
Total GC memory : 12.817 GiB
Total GC time : 3.1 seconds
Avg GC time : 72.1 ms
StdDev GC time : 14.9 ms
Total operation time : 00:00:32
生成測試結果圖
連接多節點，不要預熱過程,冷啟動任務,插入1000000萬條數據,讀寫比例3比1 ，一致性級別設置為：QUORUM
cassandra-stress user profile=./pttest-cassandra.yaml n=1000000 ops(insert=3,simple1=1) no-warmup cl=QUORUM -graph file=test.html title=test revision=test1 -node 172.20.101.157,172.20.101.160,172.20.101.167 -port native=9042
Results:
Op rate : 1,602 op/s [insert: 1,204 op/s, simple1: 398 op/s]
Partition rate : 30,941 pk/s [insert: 30,543 pk/s, simple1: 398 pk/s]
Row rate : 30,941 row/s [insert: 30,543 row/s, simple1: 398 row/s]
Latency mean : 15.6 ms [insert: 20.1 ms, simple1: 2.1 ms]
Latency median : 4.1 ms [insert: 5.9 ms, simple1: 1.2 ms]
Latency 95th percentile : 67.2 ms [insert: 74.7 ms, simple1: 5.4 ms]
Latency 99th percentile : 111.9 ms [insert: 118.9 ms, simple1: 11.7 ms]
Latency 99.9th percentile : 274.2 ms [insert: 289.4 ms, simple1: 71.3 ms]
Latency max : 2231.4 ms [insert: 2,231.4 ms, simple1: 271.1 ms]
Total partitions : 999,996 [insert: 987,127, simple1: 12,869]
Total errors : 0 [insert: 0, simple1: 0]
Total GC count : 41
Total GC memory : 12.276 GiB
Total GC time : 2.7 seconds
Avg GC time : 66.9 ms
StdDev GC time : 15.4 ms
Total operation time : 00:00:32
Improvement over 81 threadCount: -8%參考文檔：
https://docs.datastax.com/en/dse/5.1/dse-admin/datastax_enterprise/tools/toolsCStress.html
https://www.instaclustr.com/deep-diving-cassandra-stress-part-3-using-yaml-profiles/
https://zqhxuyuan.github.io/2015/10/15/Cassandra-Stress/
免責聲明：本站發布的內容（圖片、視頻和文字）以原創、轉載和分享為主，文章觀點不代表本網站立場，如果涉及侵權請聯系站長郵箱：is@yisu.com進行舉報，并提供相關證據，一經查實，將立刻刪除涉嫌侵權內容。
