如何在PHP中安裝Oracle客戶端擴展

本篇文章給大家分享的是有關如何在PHP中安裝Oracle客戶端擴展，小編覺得挺實用的，因此分享給大家學習，希望大家閱讀完這篇文章后可以有所收獲，話不多說，跟著小編一起來看看吧。

首先到oracle官網的這個頁面下載相關的文件，注意要連數據庫服務器的版本，一定要對應，否則安裝成功也會連不上，同時也要區分32位、64位服務器，比如我要連的數據庫服務器是oracle10.2.0.4，64位主機，那么我要下載下面三個文件：

復制代碼 代碼如下:

oracle-instantclient-basic-10.2.0.4-1.x86_64.rpm
oracle-instantclient-devel-10.2.0.4-1.x86_64.rpm
oracle-instantclient-sqlplus-10.2.0.4-1.x86_64.rpm

1.用以下命令安裝

復制代碼 代碼如下:

# rpm -ivh oracle-instantclient-basic-10.2.0.4-1.x86_64.rpm oracle-instantclient-devel-10.2.0.4-1.x86_64.rpm    oracle-instantclient-sqlplus-10.2.0.4-1.x86_64.rpm

2.安裝OCI8 PHP擴展

復制代碼 代碼如下:

# yum install libaio
# cd ~
# wget http://pecl.php.net/get/oci8-1.3.5.tgz

3.然后執行命令

復制代碼 代碼如下:

# tar zxvf oci8-1.3.5.tgz
# cd oci8-1.3.5/
# /usr/local/php5/bin/phpize  CFLAGS=/usr/lib/oracle/11.2/client64/ CXXFLAGS=/usr/lib/oracle/11.2/client64/
# ./configure --with-php-config=/usr/local/php5/bin/php-config --with-oci8=instantclient,/usr/lib/oracle/11.2/client64/lib/
# make
# make install(這里多運行幾次,直到出現如下提示)
 
[root@webserver02 oci8-1.3.5]# make install
/bin/sh /root/oci8-1.3.5/libtool --mode=install cp ./oci8.la /root/oci8-1.3.5/modules
cp ./.libs/oci8.so /root/oci8-1.3.5/modules/oci8.so
cp ./.libs/oci8.lai /root/oci8-1.3.5/modules/oci8.la
PATH="$PATH:/sbin" ldconfig -n /root/oci8-1.3.5/modules
----------------------------------------------------------------------
Libraries have been installed in:
   /root/oci8-1.3.5/modules

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
Installing shared extensions:     /usr/local/php5/lib/php/extensions/no-debug-zts-20090626/
# cd /usr/local/php5/lib

4.創建ext目錄

復制代碼 代碼如下:

# mkdir ext/

把oci8.so文件拷貝到php.ini 的ext目錄里面

復制代碼 代碼如下:

# cp /root/oci8-1.3.5/modules/oci8.so /usr/local/php5/lib/ext/

5.在php.ini里面加上extension=oci8.so

如下:

復制代碼 代碼如下:

extension_dir = "/usr/local/php5/lib/ext"
extension = "oci8.so"
session.save_path = "/tmp/php"
oci8.privileged_connect = on

重啟apache服務:

復制代碼 代碼如下:

/usr/local/apache2/bin/apachectl stop
/usr/local/apache2/bin/apachectl start

刷新測試頁面。發現oci8出現了,則大功告成.

以上就是如何在PHP中安裝Oracle客戶端擴展，小編相信有部分知識點可能是我們日常工作會見到或用到的。希望你能通過這篇文章學到更多知識。更多詳情敬請關注億速云行業資訊頻道。